您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE ARP4104/1 Flight Envelope Awareness/Protection

作者:标准资料网 时间:2024-05-28 16:28:45  浏览:8625   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE ARP4104/1
Title:Flight Envelope Awareness/Protection
Issuing Committee:S-7 Flight Deck Handling Qualities Stds For Trans Aircraft
Scope: This anex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflfight, Autothrottle, or Autothrust performance is compatible.
Rationale: This anex recommends additional design objectives applicable when control laws or control characteristics are modified for the purpose of Flight Envelope Awareness/Protection. While only manually controlled flight is addressed, it is assumed that Autoflfight, Autothrottle, or Autothrust performance is compatible.
下载地址: 点击此处下载
基本信息
标准名称:剪板机用刀片 型式与基本参数
中标分类: 机械 >> 通用加工机械与设备 >> 锻压机械
ICS分类: 机械制造 >> 无屑加工设备 >> 锻压设备、冲压机、剪切机
替代情况:JB 1828.1-1985
发布部门:国家机械工业局
发布日期:1999-05-14
实施日期:2000-01-01
首发日期:1900-01-01
作废日期:1900-01-01
主管部门:国家机械工业局
提出单位:全国锻压机械标准化技术委员会
归口单位:全国锻压机械标准化技术委员会
起草单位:上海冲剪机床厂
起草人:李德明
出版日期:1900-01-01
页数:7页
批文号:国机管[1999]274号
适用范围

JB/T 1828.1-1999 本标准是对 JB 1828.1-85《剪板机用刀片 型式和尺寸》的修订。 本标准规定了剪板机用刀片的型式与基本参数等。 本标准适用于一般用途的、长度在 4000mm 以下的剪板机用刀片。 本标准于 1976 年 12 月首次发布,于 1985 年 1 月修订,本次是第二次修订。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 机械 通用加工机械与设备 锻压机械 机械制造 无屑加工设备 锻压设备 冲压机 剪切机